FULL BRAND NEW turbo kit fs 1100 obo
12-21-2010, 02:16 AM
#4
Registered Member
Thread Starter
Join Date: Feb 2006
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
Re: FULL BRAND NEW turbo kit fs 1100 obo
wg is knock off tial and bov im pretty sure is knock off greddy not sure though it looks kinda convincing
turbo/mani/wg
waste gate relocater pipe
HKS ecs (hks version of safc)
HKS ecs (hey its better than an fmu)
FMIC 8x28x3 no cracks good to go, im gonna repaint it, cause it looks like shit right now
3inch down pipe with flex pipe, 5 bolt turbo flange, i can weld it together, but its much better to weld it to fit the car so you know it fits perfectly!
another pic of the turbo manifold and waste gate
brand new turbo, so of course no shaft play spins freely ect ect ect
intercooler piping and theres the other half of the dump tube in the middle there :P
heres the charge pipe with the bov, after researching more it is infact a knock off greddy that has
been jb welded on, BUT i did a boost leak test and it does not leak
a bunch of high temp silicone vacuum hose (about 6 feet)
box full of everything for ever..studs bolts an fittings npt fittings a bunch of gaskets. the stuff in this box will make your life way easier
2 different t3 flange gaskets never been used
vacuum line for boost gauge with npt fitting for gauge (about 12 feet)
and oil feed line with all nessesary fittings (about 5 feet)
turbo/mani/wg
waste gate relocater pipe
HKS ecs (hks version of safc)
HKS ecs (hey its better than an fmu)
FMIC 8x28x3 no cracks good to go, im gonna repaint it, cause it looks like shit right now
3inch down pipe with flex pipe, 5 bolt turbo flange, i can weld it together, but its much better to weld it to fit the car so you know it fits perfectly!
another pic of the turbo manifold and waste gate
brand new turbo, so of course no shaft play spins freely ect ect ect
intercooler piping and theres the other half of the dump tube in the middle there :P
heres the charge pipe with the bov, after researching more it is infact a knock off greddy that has
been jb welded on, BUT i did a boost leak test and it does not leak
a bunch of high temp silicone vacuum hose (about 6 feet)
box full of everything for ever..studs bolts an fittings npt fittings a bunch of gaskets. the stuff in this box will make your life way easier
2 different t3 flange gaskets never been used
vacuum line for boost gauge with npt fitting for gauge (about 12 feet)
and oil feed line with all nessesary fittings (about 5 feet)
Last edited by A L I A S; 12-22-2010 at 10:34 AM.
12-22-2010, 10:11 AM
#6
Registered Member
Thread Starter
Join Date: Feb 2006
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
Re: FULL BRAND NEW turbo kit fs 1100 obo
hahahahaha nice! no the rest of the dump tube comes with the kit if i ever get time i will post the rest of the pics up
edit:yess just found a sneaky way into photobucket at work pics will be up shortly
edit:yess just found a sneaky way into photobucket at work pics will be up shortly
Last edited by A L I A S; 12-22-2010 at 10:13 AM.