FJT Custom Length Rods w/ARP 2000 Rod Bolts. Vitara
07-22-2011, 09:30 PM
#1
Registered Member
Thread Starter
Join Date: Jul 2003
Posts: 446
Likes: 0
Received 0 Likes
on
0 Posts
FJT Custom Length Rods w/ARP 2000 Rod Bolts. Vitara
Name: Aaron
Location: Hampton
Means of contact: Call or Text 757-329-3355
Price: $300.00 OBO... Trades for Wideband!!
Description:
These rods were designed Specifically to run the Vitara pistons into
D16 engines. When you use standard length (137mm) rods with
Vitara pistons, the pistons will either stay below the deck (d16 engines)
or go up pass above the deck height (JDM D15).
Even though the setups have worked like this(using std length rods),
this is not completely ideal because the combustion is happening
not at the right place and there are compression ratios issues
(very low CR). So we have designed a custom I beam rod with a
custom length to solve this issue. Using this rod the Vitara piston
will sit right at deck height providing more Compression(one full point
on D16 engines) and making the combustion happen where it has to be.
These rods are used, but in great condition. They come with ARP 2000 rod bolts
and with 3 good condition 75.5mm YCP Vitaras, The last rod has a Vitara with a broken ringland.
While the piston was mildly damaged, it will not properly seal the cylinder, and will need to be replaced.
More info located here...http://fjdistributors.com/product_in...roducts_id=270
Any Questions feel free to call or text.
Trades: Let me know what you got ....I really need a wide band .
Pictures:
Picture of Damaged Vitara.
Location: Hampton
Means of contact: Call or Text 757-329-3355
Price: $300.00 OBO... Trades for Wideband!!
Description:
These rods were designed Specifically to run the Vitara pistons into
D16 engines. When you use standard length (137mm) rods with
Vitara pistons, the pistons will either stay below the deck (d16 engines)
or go up pass above the deck height (JDM D15).
Even though the setups have worked like this(using std length rods),
this is not completely ideal because the combustion is happening
not at the right place and there are compression ratios issues
(very low CR). So we have designed a custom I beam rod with a
custom length to solve this issue. Using this rod the Vitara piston
will sit right at deck height providing more Compression(one full point
on D16 engines) and making the combustion happen where it has to be.
These rods are used, but in great condition. They come with ARP 2000 rod bolts
and with 3 good condition 75.5mm YCP Vitaras, The last rod has a Vitara with a broken ringland.
While the piston was mildly damaged, it will not properly seal the cylinder, and will need to be replaced.
More info located here...http://fjdistributors.com/product_in...roducts_id=270
Any Questions feel free to call or text.
Trades: Let me know what you got ....I really need a wide band .
Pictures:
Picture of Damaged Vitara.
Last edited by 341am; 08-01-2011 at 08:36 AM. Reason: PICS
Thread
Thread Starter
Forum
Replies
Last Post
jdmontheway
Engine / Exhaust / Drivetrain
10
12-23-2010 10:09 PM
jdmontheway
Engine / Exhaust / Drivetrain
22
12-17-2010 03:42 PM