B20/LS head and B20 short block
11-05-2009, 12:26 PM
#1
Registered member
Thread Starter
Join Date: Nov 2007
Posts: 446
Likes: 0
Received 0 Likes
on
0 Posts
B20/LS head and B20 short block
Name: David
Location: Chesterfield
Contact: PM or this thread
Price: $200 for everything
$100 for head w/ valve cover and head bolts
SOLD!-->$100 for dissassembled short block, Everything is there, comes with a set of PR4 rods
Description:
I have for sale a B20/LS P75 head, comes with all valvetrain, valve cover, rod bolts. B20B shortblock, comes with B20B block, crank, main caps, main cap bolts, oil pump, oil pick up (does not come with oil pan), windage tray, crank gear and bolt, thermostat housing and tube, drivers side motor mount bracket, water pump. The block could use a hone and some new rings for the pistons, the reason I am including extra rods is because number one cylinder spun a rod bearing and 2 of the rods were bent. The crank is in good condition and has no major issues. A fresh hone, rings and bearings and this is a complete engine.
Thanks for looking!
Keep all negative comments to yourselves!
Location: Chesterfield
Contact: PM or this thread
Price: $200 for everything
$100 for head w/ valve cover and head bolts
SOLD!-->$100 for dissassembled short block, Everything is there, comes with a set of PR4 rods
Description:
I have for sale a B20/LS P75 head, comes with all valvetrain, valve cover, rod bolts. B20B shortblock, comes with B20B block, crank, main caps, main cap bolts, oil pump, oil pick up (does not come with oil pan), windage tray, crank gear and bolt, thermostat housing and tube, drivers side motor mount bracket, water pump. The block could use a hone and some new rings for the pistons, the reason I am including extra rods is because number one cylinder spun a rod bearing and 2 of the rods were bent. The crank is in good condition and has no major issues. A fresh hone, rings and bearings and this is a complete engine.
Thanks for looking!
Keep all negative comments to yourselves!
Last edited by jdm90cb7; 11-08-2009 at 07:25 AM.
