B17 Block & Crank, Crower rods, SRP 10.5 Pistons.B16 p&p head Crower cams
#1
Registered Member
Thread Starter
Join Date: Sep 2010
Location: Bedford
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
B17 Block & Crank, Crower rods, SRP 10.5 Pistons.B16 p&p head Crower cams
James
Lynchburg,VA
DC2WPR@gmail.com
I am new to this forums o you can check my ebay feeedback just look under j.blazin.pics are in attachments Thats the only way I could figure out to post them.
The b17a1 block, Crower rods and Srp pistons have around 12k miles on them since rebuild. Also the Crower cams have around 12k miles. I had them in a teg I used to own but sold to a guy who drove it a while and tore it apart to set it up for turbo but never got around to doing it so I bought it back recently. I could not get the original b17 head back so I picked up the b16 head to use for my build. The head has been ported and polished and it has dual springs and titanium retainers, I was told they were skunk2. That is what i know about the head. I hate to sell this stuff but need the cash for another project. I would like to sell it all together for $900 obo. I will seperate though.
-b17a1 block with crank (both standard size)$150
-Crower 4340 billet rods with SRP 10.5 compression pistons. $415 (rods cost $750 new)
-$500 for all above.
-b16 head port & polish, dual springs and Ti. retainers.$375
-Crower stage 2 cams $200
-$500 for head and cams.
Prices are somewhat negotiatable.
I prefer not to ship head crank or block.
Lynchburg,VA
DC2WPR@gmail.com
I am new to this forums o you can check my ebay feeedback just look under j.blazin.pics are in attachments Thats the only way I could figure out to post them.
The b17a1 block, Crower rods and Srp pistons have around 12k miles on them since rebuild. Also the Crower cams have around 12k miles. I had them in a teg I used to own but sold to a guy who drove it a while and tore it apart to set it up for turbo but never got around to doing it so I bought it back recently. I could not get the original b17 head back so I picked up the b16 head to use for my build. The head has been ported and polished and it has dual springs and titanium retainers, I was told they were skunk2. That is what i know about the head. I hate to sell this stuff but need the cash for another project. I would like to sell it all together for $900 obo. I will seperate though.
-b17a1 block with crank (both standard size)$150
-Crower 4340 billet rods with SRP 10.5 compression pistons. $415 (rods cost $750 new)
-$500 for all above.
-b16 head port & polish, dual springs and Ti. retainers.$375
-Crower stage 2 cams $200
-$500 for head and cams.
Prices are somewhat negotiatable.
I prefer not to ship head crank or block.
Last edited by DC2WPR; 09-02-2010 at 06:00 AM.
#5
Registered Member
Thread Starter
Join Date: Sep 2010
Location: Bedford
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Re: B17 Block & Crank, Crower rods, SRP 10.5 Pistons.B16 p&p head Crower cams
Prices neg. Open for trades to.Would like to have a Carbon Power Chamber(whale penis) intake for ls if anybody has one they might want to trade.