B-Series Turbonetics kit with Precision Injectors
#1
Registered member
Thread Starter
Join Date: May 2009
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
B-Series Turbonetics kit / Price drop
Name: David
Location: Bristow, VA
Contact: post in here or PM me.
PRICE DROPPED TO $1100
I have decided to sell the turbo kit that I bought for my GS-R. I payed $1600 for it but have decided to keep the Integra a DD so I want to go ahead and sell it. It is a turbonetics kit with a Spearco W.A.V.E intercooler. The turbo has absolutely no shaft play. Included with the kit is everything but the manifold and oil drain line. Both of those can be picked up fairly cheap on craigslist or forums. You will be getting: Turbonetics turbo and all of the piping, two downpipes: one is 2.5 inch and AC compatible, the other is 3" and is not AC compatible (I have been told you can modify it to work), the Spearco intercooler, almost a brand new set of Precision 450cc injectors, Turbonetics blow-off valve, Turbonetics Evolution wastegate, custom open dump tube, two air filters, as well as all of the neccessary couplers, clamps, and oil feed lines. This kit made 296 whp on a stock internal B18c1. Looking to get $1500 for everything.
Location: Bristow, VA
Contact: post in here or PM me.
PRICE DROPPED TO $1100
I have decided to sell the turbo kit that I bought for my GS-R. I payed $1600 for it but have decided to keep the Integra a DD so I want to go ahead and sell it. It is a turbonetics kit with a Spearco W.A.V.E intercooler. The turbo has absolutely no shaft play. Included with the kit is everything but the manifold and oil drain line. Both of those can be picked up fairly cheap on craigslist or forums. You will be getting: Turbonetics turbo and all of the piping, two downpipes: one is 2.5 inch and AC compatible, the other is 3" and is not AC compatible (I have been told you can modify it to work), the Spearco intercooler, almost a brand new set of Precision 450cc injectors, Turbonetics blow-off valve, Turbonetics Evolution wastegate, custom open dump tube, two air filters, as well as all of the neccessary couplers, clamps, and oil feed lines. This kit made 296 whp on a stock internal B18c1. Looking to get $1500 for everything.
Last edited by Yeaitsahonda; 11-25-2010 at 04:47 AM.
#4
management
Join Date: Aug 2009
Location: choosing seats
Posts: 5,412
Likes: 0
Received 0 Likes
on
0 Posts
Re: B-Series Turbonetics kit with Precision Injectors
#5
Registered member
Thread Starter
Join Date: May 2009
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Re: B-Series Turbonetics kit with Precision Injectors
I am selling it exactly how I bought it. It came with no manifold. This kit is good for 280-300whp easily with the 3in downpipe and a basic log style manifold which can be bought new for under 200. Obviously, if you wanted to make more power you could spend a lot more on a better manifold, but that is up to the buyer.
#6
Re: B-Series Turbonetics kit with Precision Injectors
Im not triying to bash either just asking how it is you buy a kit and then use it for however long then turn around and take 2 parts off and subtract 100$ IMHO youll have better responses for about a grand or 1100.
#7
Registered member
Thread Starter
Join Date: May 2009
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Re: B-Series Turbonetics kit with Precision Injectors
Maybe I wasn't clear enough. I didn't use the kit. I bought it and it sat in my house since March. I had plans of buying the other pieces and getting it on this winter, but that is not going to happen. If I can't get close to what I am asking then I will probably keep it and rethink putting it on in a few months.
#10
Registered member
Thread Starter
Join Date: May 2009
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Re: B-Series Turbonetics kit with Precision Injectors
Still for sale. Lowered the price to $1100 firm. Would like to free up some money for the holidays.
Last edited by Yeaitsahonda; 11-25-2010 at 04:48 AM.