82mm lsvtec bottom end b16 pistons, resized rods, arp,new 0 miles $1200
#1
Registered member
Thread Starter
Join Date: Feb 2010
Location: Raleigh, NC
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
82mm lsvtec bottom end b16 pistons, resized rods, arp,new 0 miles $900 block only
Name:garrett
Location: wake forest,nc
Contact:9197603736 I prefer calling or texting faster response
So up for sale is my 82mm Ls Vtec block. I just finished this bottom end about 2 weeks ago. Turned and polished crank .25 over on mains and rod bearings. That's doesn't affect anything. I've used a Ls crank with .50 over bearings and turned it 9,800rpms and when I inspected the bearing 10,000 miles I could still see the clevitte clear coating on them. So arp rod bolts resized Ls rods,82mm b16 pistons, block was decked, bored, honed, line bore was checked. I have the arp head studs, golden eagle Ls Vtec kit, I can also finish the motor with a deposit. In willing to take some of the price down for a used or blown up block. But don't expect more than a minimum for you block because I'm 80 percent sure it'll need work. Hmu
Location: wake forest,nc
Contact:9197603736 I prefer calling or texting faster response
So up for sale is my 82mm Ls Vtec block. I just finished this bottom end about 2 weeks ago. Turned and polished crank .25 over on mains and rod bearings. That's doesn't affect anything. I've used a Ls crank with .50 over bearings and turned it 9,800rpms and when I inspected the bearing 10,000 miles I could still see the clevitte clear coating on them. So arp rod bolts resized Ls rods,82mm b16 pistons, block was decked, bored, honed, line bore was checked. I have the arp head studs, golden eagle Ls Vtec kit, I can also finish the motor with a deposit. In willing to take some of the price down for a used or blown up block. But don't expect more than a minimum for you block because I'm 80 percent sure it'll need work. Hmu
Last edited by integraluva04; 02-13-2015 at 05:33 PM. Reason: price reduction
#2
Registered member
Thread Starter
Join Date: Feb 2010
Location: Raleigh, NC
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
Re: 82mm lsvtec bottom end b16 pistons, resized rods, arp,new 0 miles $1200
bump
#3
Re: 82mm lsvtec bottom end b16 pistons, resized rods, arp,new 0 miles $1200
Thts a nice block dude. Glws
#4
Registered member
Thread Starter
Join Date: Feb 2010
Location: Raleigh, NC
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
Re: 82mm lsvtec bottom end b16 pistons, resized rods, arp,new 0 miles $1200
bump
#5
Registered member
Thread Starter
Join Date: Feb 2010
Location: Raleigh, NC
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
Re: 82mm lsvtec bottom end b16 pistons, resized rods, arp,new 0 miles $1200
bump
#6
Registered member
Thread Starter
Join Date: Feb 2010
Location: Raleigh, NC
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
Re: 82mm lsvtec bottom end b16 pistons, resized rods, arp,new 0 miles $1200
$1000 bump
Thread
Thread Starter
Forum
Replies
Last Post
atifsays
Engine / Exhaust / Drivetrain
23
02-16-2010 10:19 AM