3 Brand New IHI Power Enterpries Dual Ball Bearing PE1420 Turbos
12-07-2009, 07:37 PM
#1
Registered Member
Thread Starter
Join Date: May 2009
Posts: 340
Likes: 0
Received 0 Likes
on
0 Posts
3 Brand New IHI Power Enterpries Dual Ball Bearing PE1420 Turbos
Name: George
Location: Raleigh NC
Contact: PM or 910-232-2558
Price: $1000
http://www.rhdjapan.com/jdm/Power-En...-SR20DET-50383
I am selling a brand new Turbo I received from IHI Power Enterprise. This turbo has 0 miles of use. The turbo was going to be used for my S14 but I have sold the car before I ever even got the turbo.
This turbo is a modified IHI turbo from Power enterprise. It is one of their "Response Series" turbos. The PE1420 turbo utilizes a slant-flow blade design which allows the turbo to spool at an incredibly low RPM and still give out good horsepower gains all the way up to redline. Since the angle of the flanges are similar to the S14 and S15 turbos, Power Enterprise has attached a few extras to this kit to make the turbo compatible. Installation is quite simple with this kit, making this a plug and play turbo. This turbo hits hard from 2500 rpm with good power all the way to 7,000 giving it a very broad, useable power band
Compressor
Dual Ball bearing turbocharger
Inducer
1.79"/45.5mm
Exducer
2.37"/60mm
Turbine
Exducer
1.73"/44
Inducer
1.89"/48mm
This turbo is going new from $1399.00 - $1700 without the intake upgrade I have.
These turbos are direct bolt on for SR20 setups.
I HAVE 3 of these. One is set up for external wastegate and the others are internally gated.
Pictured is the external, will get pics of the other three asap.
Location: Raleigh NC
Contact: PM or 910-232-2558
Price: $1000
http://www.rhdjapan.com/jdm/Power-En...-SR20DET-50383
I am selling a brand new Turbo I received from IHI Power Enterprise. This turbo has 0 miles of use. The turbo was going to be used for my S14 but I have sold the car before I ever even got the turbo.
This turbo is a modified IHI turbo from Power enterprise. It is one of their "Response Series" turbos. The PE1420 turbo utilizes a slant-flow blade design which allows the turbo to spool at an incredibly low RPM and still give out good horsepower gains all the way up to redline. Since the angle of the flanges are similar to the S14 and S15 turbos, Power Enterprise has attached a few extras to this kit to make the turbo compatible. Installation is quite simple with this kit, making this a plug and play turbo. This turbo hits hard from 2500 rpm with good power all the way to 7,000 giving it a very broad, useable power band
Compressor
Dual Ball bearing turbocharger
Inducer
1.79"/45.5mm
Exducer
2.37"/60mm
Turbine
Exducer
1.73"/44
Inducer
1.89"/48mm
This turbo is going new from $1399.00 - $1700 without the intake upgrade I have.
These turbos are direct bolt on for SR20 setups.
I HAVE 3 of these. One is set up for external wastegate and the others are internally gated.
Pictured is the external, will get pics of the other three asap.
Last edited by Abl 2 fly; 12-07-2009 at 07:42 PM.
Thread
Thread Starter
Forum
Replies
Last Post