1994 caprice with 357 lt1 and boltons
11-01-2009, 01:54 PM
#1
Registered Member
Thread Starter
Join Date: Jan 2004
Location: Richmond,Va
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
1994 caprice with 357 lt1 and boltons
* Name: Jamie
* Location: Richmond, VA
* Means on contact: PM this thread or email Lewisjo08@hotmail.com
* Trades: No trades found my next project already selling this to purchase it lol
* Price: $2,500 obo
* Description:
Hey Everybody,
Think it’s about that time for me to move on from my 94 caprice. I am wanting a new project and have no room for this,my astro and another project. I will list below what the car has and what the car needs
Engine - Jasper 357cid LT1, and includes the following:
* Accel 30 lb./hr. injectors
* Hooker Super Comp equal-length headers (1.75" primaries)
* F-body EGR valve
* De-screened MAF
* Hypertech 160 thermostat
* MSD GM Blaster coil
* Taylor 8 mm Spiro-Pro wires
* Custom intake pipe with K&N filter
* Custom cold-air box
*Corvette Mini Starter
Dynomax Catback with polished ss mufflers and custom ota pipes exiting right after the rear wheels
PCM (Powertrain Control Module), OBD-I, custom programmed by Bryan Herter, which includes the following: (also have a pcmperfromance tune,tuned for the edge converter and 2.93 gears)
* Power Programming
* Speed limiter eliminated
* Speedometer calibrated for exact tire height and rear end gear ratio
* Calibrated for 30# injectors
* Fans on/off temperatures reprogrammed to work with the 160 thermostat
* LT4 knock module
Drivetrain Team Tripp Lvl 2(3/4 burnt up):
* Stage 3+ shift kit
* Billet servo
* Raptor sunshell
* Tru-cool crossflow transmission cooler
* 2.93 rear end gears
* Inland Empire aluminum driveshaft
500 mile Street Edge 9.5 inch 3200 rpm stall
Brakes
* KVR Cross-drilled rotors in front
* EBC GreenStuff Kevlar brake pads
Suspension
* Eibach progressive-rate lowering springs (smooth ride but really tightens up in the curves when you need it)
* Front & rear sway bars (rear bar is Impala SS unit)
* Koni "Red" shocks up front, KYB "Gas-A-Just" in rear
* Prime 200 16x8 wheels
* Falkin Ziex 712 tires (255/50 rear, 225/55 front)
Gauges
* Gaugeworks interior dual gauge pod
* Auto Meter "Z-Series" Cylinder Head Temperature gauge, mounted in the pod
* Auto Meter "Z-Series" Transmission Temperature gauge, mounted in the pod
* Auto Meter "Sport Comp" Boost/Vacuum gauge, mounted on the hood
* Auto Meter "Sport Comp" Fuel Pressure gauge, mounted on the hood
* (2)Auto Meter "Sport Comp" Air/Fuel Ratio gauges, one for each bank, mounted in the dash bezel
* Autogauge 8,000 RPM Tachometer with shift light, mounted under the dash
Appearance(paint on this car is amazing for a 15 year old car)
* Caprice SS rear quarter-panel scripts
* White reflective "bow tie" on the trunk
* LTZ hood emblem
* Modified front corner lamps (added extra bulbs, also a safety feature)
* Pinstriped and color-matched tail light lenses
* Caprice SS dash plate
Car does have some issues,
-Trans needs to be rebuilt. Does not have ¾ at all still has ½
-Rear Sway bar is loose,I would suggest upgrading to 96 arms because they have a better mounting points
-Bumpers could use a repaint.
-Front door panels are cut where the speakers are,I was going to go with the Will B Speaker Pods
-Drivers Side door has a minor dent,(you honestly can't see it unless you are about 5 ft from car)
-passenger side cat should be replace,passed inspection fine,but has a hairline crack in it
-no radio
-air needs to be recharged
I probably am forgetting some stuff but if you have any questions at all you can send me a pm. Thanks
Asking 2300 obo, will consider trades, let me know what you have.
Please contact me if you're interested.
* Details:
o Mileage: 204k on body 65k on engine
o Exterior Condition: Pretty nice except bumper could stand a repaint and dent on drivers door.
o Interior Condition: ok all their
o Modifications: Listed above
* Location: Richmond, VA
* Means on contact: PM this thread or email Lewisjo08@hotmail.com
* Trades: No trades found my next project already selling this to purchase it lol
* Price: $2,500 obo
* Description:
Hey Everybody,
Think it’s about that time for me to move on from my 94 caprice. I am wanting a new project and have no room for this,my astro and another project. I will list below what the car has and what the car needs
Engine - Jasper 357cid LT1, and includes the following:
* Accel 30 lb./hr. injectors
* Hooker Super Comp equal-length headers (1.75" primaries)
* F-body EGR valve
* De-screened MAF
* Hypertech 160 thermostat
* MSD GM Blaster coil
* Taylor 8 mm Spiro-Pro wires
* Custom intake pipe with K&N filter
* Custom cold-air box
*Corvette Mini Starter
Dynomax Catback with polished ss mufflers and custom ota pipes exiting right after the rear wheels
PCM (Powertrain Control Module), OBD-I, custom programmed by Bryan Herter, which includes the following: (also have a pcmperfromance tune,tuned for the edge converter and 2.93 gears)
* Power Programming
* Speed limiter eliminated
* Speedometer calibrated for exact tire height and rear end gear ratio
* Calibrated for 30# injectors
* Fans on/off temperatures reprogrammed to work with the 160 thermostat
* LT4 knock module
Drivetrain Team Tripp Lvl 2(3/4 burnt up):
* Stage 3+ shift kit
* Billet servo
* Raptor sunshell
* Tru-cool crossflow transmission cooler
* 2.93 rear end gears
* Inland Empire aluminum driveshaft
500 mile Street Edge 9.5 inch 3200 rpm stall
Brakes
* KVR Cross-drilled rotors in front
* EBC GreenStuff Kevlar brake pads
Suspension
* Eibach progressive-rate lowering springs (smooth ride but really tightens up in the curves when you need it)
* Front & rear sway bars (rear bar is Impala SS unit)
* Koni "Red" shocks up front, KYB "Gas-A-Just" in rear
* Prime 200 16x8 wheels
* Falkin Ziex 712 tires (255/50 rear, 225/55 front)
Gauges
* Gaugeworks interior dual gauge pod
* Auto Meter "Z-Series" Cylinder Head Temperature gauge, mounted in the pod
* Auto Meter "Z-Series" Transmission Temperature gauge, mounted in the pod
* Auto Meter "Sport Comp" Boost/Vacuum gauge, mounted on the hood
* Auto Meter "Sport Comp" Fuel Pressure gauge, mounted on the hood
* (2)Auto Meter "Sport Comp" Air/Fuel Ratio gauges, one for each bank, mounted in the dash bezel
* Autogauge 8,000 RPM Tachometer with shift light, mounted under the dash
Appearance(paint on this car is amazing for a 15 year old car)
* Caprice SS rear quarter-panel scripts
* White reflective "bow tie" on the trunk
* LTZ hood emblem
* Modified front corner lamps (added extra bulbs, also a safety feature)
* Pinstriped and color-matched tail light lenses
* Caprice SS dash plate
Car does have some issues,
-Trans needs to be rebuilt. Does not have ¾ at all still has ½
-Rear Sway bar is loose,I would suggest upgrading to 96 arms because they have a better mounting points
-Bumpers could use a repaint.
-Front door panels are cut where the speakers are,I was going to go with the Will B Speaker Pods
-Drivers Side door has a minor dent,(you honestly can't see it unless you are about 5 ft from car)
-passenger side cat should be replace,passed inspection fine,but has a hairline crack in it
-no radio
-air needs to be recharged
I probably am forgetting some stuff but if you have any questions at all you can send me a pm. Thanks
Asking 2300 obo, will consider trades, let me know what you have.
Please contact me if you're interested.
* Details:
o Mileage: 204k on body 65k on engine
o Exterior Condition: Pretty nice except bumper could stand a repaint and dent on drivers door.
o Interior Condition: ok all their
o Modifications: Listed above
Thread
Thread Starter
Forum
Replies
Last Post