LShatch59

I got a 2005 400cc honda quad and i fliped it back and it rolled a little bit on some dirt the other night and bent the handel bars twisted back the clutch lever and some scratchs thats about it. But when i went to go start it with the electric start (no kick start) it would not start or click or nothin and the head lights wouldnt turn on eather... so when i get home i check the 2 fuses which were good and i replaced them any ways and still no start so i took a screw driver to the starter solinoid and it started that way and would only start when the key is turned on and the kill switch was also working as it should .. so i have no idea wat is wrong with it i have all plasctics off and traced all the wires and they all look good and connected and i couldnt see if there was any in line fuses or somthing but if anyone could help me out thad be great PLEASSSSE !! thanks

skr00zloose

usually there's a "main" fuse on the starter solenoid, if that's the case, check that one.

LShatch59

yea i saw a 15amp fuse but that was it ill double check again thow

skr00zloose

you have to pull the plug on the solenoid. the fuse is under the plug. there's usually a spare strapped to the side of the solenoid.

of course i'm used to dealing with honda motorcycles, thier atv's may be different. we have a 400ex at the shop, i'll check when i get there today.

LShatch59

k lemme no thanks man