zc crank problem
09-04-2011, 11:04 AM
#1
Registered Member
Thread Starter
Join Date: Jul 2011
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
zc crank problem
so this is really pissin me off. my crank is not spinnin as easy as it should be. i took the last 3 pistons out, cause with the last one while i was taking them out, it would spin. i put the next one in, and now its back to not spinning. i tried switching each connecting rod with it, but its not doin shit. shoulda kept them in order when i took it apart
its a obd0 nonvtec zc with new d16a6 piston rings and new d16a6 bearings. (other stuff was here)
This post has been edited by the moderation staff.
its a obd0 nonvtec zc with new d16a6 piston rings and new d16a6 bearings. (other stuff was here)This post has been edited by the moderation staff.
Last edited by Fabrik8; 09-04-2011 at 05:59 PM. Reason: Scrubbing...
09-04-2011, 12:24 PM
#4
RIP DRAGVA-2016
Join Date: Sep 2008
Location: super secret
Posts: 17,242
Likes: 0
Received 0 Likes
on
0 Posts
Re: zc crank problem
so this is really pissin me off. my crank is not spinnin as easy as it should be. i took the last 3 pistons out, cause with the last one while i was taking them out, it would spin. i put the next one in, and now its back to not spinning. i tried switching each connecting rod with it, but its not doin shit. shoulda kept them in order when i took it apart its a obd0 nonvtec zc with new d16a6 piston rings and new d16a6 bearings.
its a obd0 nonvtec zc with new d16a6 piston rings and new d16a6 bearings.you forgot to quote him
Last edited by Fabrik8; 09-04-2011 at 06:00 PM. Reason: Scrubbing...
09-04-2011, 03:39 PM
#7
Registered Member
Join Date: Mar 2008
Location: Near Lynchburg
Posts: 235
Likes: 0
Received 0 Likes
on
0 Posts
Re: zc crank problem
Go to local auto parts store. Ask for plasti-gage (green). Look on google for instructions of how to use it. Clearance each bearing. If it worked before disassembly, with enough time you can figure out the reassembly configuration. Zip Loc bags and a Sharpie marker during disassembly will save you from this next time.
09-04-2011, 04:55 PM
#9
RIP DRAGVA-2016
Join Date: Sep 2008
Location: super secret
Posts: 17,242
Likes: 0
Received 0 Likes
on
0 Posts
09-04-2011, 05:02 PM
#10
i pooped a squirrel
Join Date: Nov 2009
Location: Ravaging shitholes
Posts: 9,307
Likes: 0
Received 0 Likes
on
0 Posts