92hondadriven

I have these wires on my cabin harness that are cut it is maybe 10 inches from where the harness meets the engine harness there is a total of 15 in the loom together that are cut

Nunyabidness

So what's the problem? Your title says help, but all you're telling us is that you have some cut wires... Need them? Match color to color and solder them back together.

Lord Humongous

You, this thread and your car are useless

92hondadriven

I need to know what they go to the are just cut on harness no clue what they go to

SortaFlush

We have no clue what they go to either.

Reasons being;

-We don't know the Year, Make, Model of the car.

-Don't know which sub-harness they are coming off of.

-We don't know you

-So we don't care.

-You're shit out of luck and might as well kill it with fire.
















In all honesty, best bet is to get a Helms or find wiring diagrams and backtrack from the area the harness is located in. It's hard for us to give you details when we have none.

Nunyabidness

Trace where the corresponding end goes... I don't think you need to really know WHERE they go, as much as HOW they go back together. Cut=not functioning, soldered/heat shrunk=good. Amirite?

92hondadriven

Its on a 92 civic hatch like i said they are right by where the engine harness connects

SortaFlush

The engine harness connects in more than one place,

like I said.

92hondadriven

It is the one that has the external fuse box on the same harness as well as connects to the ecu

Yep4doors

This thread is full of loss, you know that Honda wiring diagrams are all over the web because idiots like you don't know how to use common logic.

In all honesty you should just get another wiring harness because you can find them ANYWHERE!!!!