wat do u guys think is better
#1
wat do u guys think is better
im tring to see what would be a better choose to put in my gsr block ..putting itr pistons or b16 pistons with my gsr rods....i have b16 head ima put on also with itr intake mani and itr camshafts
#2
I drive a coupe
Join Date: Feb 2004
Location: Virginia Beach
Posts: 762
Likes: 0
Received 0 Likes
on
0 Posts
Re: wat do u guys think is better
http://www.zealautowerks.com/bseries.html
your friend
If they are USDM ITR (P73-A0) pistons, I would rather use the B16's.. If they are JDM ITR (P73-00) pistons, they are better than both PR3 and P30's...
What are your goals, you might want to consider using B16B pistons, they will give you an upper 12:1 ratio depending on the head and block machining...
It really depends on what you want.
your friend
If they are USDM ITR (P73-A0) pistons, I would rather use the B16's.. If they are JDM ITR (P73-00) pistons, they are better than both PR3 and P30's...
What are your goals, you might want to consider using B16B pistons, they will give you an upper 12:1 ratio depending on the head and block machining...
It really depends on what you want.
Last edited by Hatch Man(GsR); 02-03-2009 at 07:09 PM.
#4
boostidasfuk?!?!?!?
Join Date: Mar 2005
Location: newport news
Posts: 1,124
Likes: 0
Received 0 Likes
on
0 Posts
Re: wat do u guys think is better
jdm itr pistons would work out nice for you but i have ctr pistons in mine and its working out great for me. so whichever one you want to go with should work great i believe that ctr pistons give you a little higher compression than jdm itr
Thread
Thread Starter
Forum
Replies
Last Post