Delta Charlie

A while back I had notice that I started to get some vibration under acceleration, both casual driving and some under hard pulls. I figured it would be the axles considering one of them had a tore boot and I was getting quite a bit of clicking when turning. I replaced both driver and passenger side axles this week with brand new ones but am still getting vibration. It's not just the steering wheel too, the whole car shakes quite a bit. What else could it possibly be that coule be causing this? Thanks

L_U_C_K

Wheels balanced, or any bends in the wheel?

Delta Charlie

No bends in the wheels. I also just rotated them less than 100 miles ago. New tires less than 1,500 miles ago too.. It also did the vibration before the new tires.

L_U_C_K

Bad motor mount

TiredToyotaDrvr

this

boredom

or bad wheel bearing.

TiredToyotaDrvr

you can usually hear them before you feel them

Delta Charlie

I'm gonna check the mounts today. Thanks for all the quick replies.

crxmadness

might want to also check for worn bushings, worn shocks, worn ball joints, and loose suspension bolts.

Fabrik8

Probably loose/worn bushings and poor alignment settings.