Valve Adjustment after replacing LMA's?
08-19-2011, 06:16 PM
#1
Registered member
Thread Starter
Join Date: Jul 2008
Posts: 569
Likes: 0
Received 0 Likes
on
0 Posts
Valve Adjustment after replacing LMA's?
Hey guys, I am in the process of replacing my Lost Motion Assemblies and I was wondering will I need to adjust the valves after I replace them?
08-19-2011, 06:35 PM
#5
Racetracks
Join Date: Nov 2002
Location: How long is a piece of string?
Posts: 15,668
Likes: 0
Received 0 Likes
on
0 Posts
Re: Valve Adjustment after replacing LMA's?
Use a feeler gauge to check the clearance.
I guess I should qualify what I said before: Removing and reinstalling the cams is what would potentially change the valve clearance, and it's fairly easy to check and adjust the valves while you're in there. The LMAs are just compression devices and aren't on a valve so there is nothing that needs to be adjusted.
I guess I should qualify what I said before: Removing and reinstalling the cams is what would potentially change the valve clearance, and it's fairly easy to check and adjust the valves while you're in there. The LMAs are just compression devices and aren't on a valve so there is nothing that needs to be adjusted.
Thread
Thread Starter
Forum
Replies
Last Post