turbo cams in a N/A??!?!
#1
Registered Member
Thread Starter
Join Date: Nov 2005
Location: VB
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
turbo cams in a N/A??!?!
does anyone know how a 4g63 n/a would run with turbo cams? Need to know quick cause i have the chance to get them and if its gonna do me any good im gonna get them.
#2
Re: turbo cams in a N/A??!?!
dont quote me on this but if i remember right it would give you alot of torque but the higher rpm would fall off dramatically. do a search on honda-tech.com.
#4
RIP Chris Schader
#5
Re: turbo cams in a N/A??!?!
Originally Posted by MitsuColt
search hondatech for mitsu information?
#6
braap braap
Join Date: Jul 2003
Location: Portsmouth
Posts: 14,535
Likes: 0
Received 0 Likes
on
0 Posts
Re: turbo cams in a N/A??!?!
Originally Posted by EclipZ
lol. read this thread
#7
Registered Member
Thread Starter
Join Date: Nov 2005
Location: VB
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Re: turbo cams in a N/A??!?!
aight thanx. well if i get them i guess it couldnt hurt and if i do get around to boosting it then ill already have bigger cams.
#8
Registered Member
Join Date: Apr 2004
Location: Va. Beach
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Re: turbo cams in a N/A??!?!
The gains that you would see are probably minimal at best. Here are the measurements for the cams that would be applicable: You do the math.
2.0 4g63
Cam height- (intake)
Non-Turbo, Turbo M/T~ 35.493
Turbo A/T~ 35.200
(exhaust)
Non-Turbo, Turbo A/T~ 35.200
Turbo M/T~ 35.493
Intake valve:
Opens (BTDC) 26deg (non-turbo)
21deg (turbo)
Closes (ATDC) 46deg (non-turbo)
51deg (turbo)
Exhaust valve:
Opens (BBDC) 55deg
Closes (ATDC) 9deg
2.0 4g63
Cam height- (intake)
Non-Turbo, Turbo M/T~ 35.493
Turbo A/T~ 35.200
(exhaust)
Non-Turbo, Turbo A/T~ 35.200
Turbo M/T~ 35.493
Intake valve:
Opens (BTDC) 26deg (non-turbo)
21deg (turbo)
Closes (ATDC) 46deg (non-turbo)
51deg (turbo)
Exhaust valve:
Opens (BBDC) 55deg
Closes (ATDC) 9deg
Thread
Thread Starter
Forum
Replies
Last Post