throttle angle question d16a6
#1
Registered Member
Thread Starter
Join Date: Jun 2006
Location: Springfield,MA.
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
throttle angle question d16a6
i put zc or pm7 pistons into a d16a6 block. i started the car and the check engine light came on. looked at the ecu and is blinking 7 times. telling me that is the throttle angle sensor. i turn the ignition switch off. removed the hazard fuse to reset the ecu, still on. what could it be. any suggestion. thanks.
#3
Registered Member
Thread Starter
Join Date: Jun 2006
Location: Springfield,MA.
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
#4
Registered Member
Thread Starter
Join Date: Jun 2006
Location: Springfield,MA.
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Re: throttle angle question d16a6
it's the tps. removed the rubber cover that comes with it and it was cracked, wet and rusted inside. so, you guys knows what that mean.
I NEED A TPS ASAP. Chesapeake area. Thanks for all replied.
I NEED A TPS ASAP. Chesapeake area. Thanks for all replied.
#5
Registered member
Join Date: Apr 2003
Location: Ellicott City MD 21043
Posts: 1,625
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post