talon tsi awd cant get to start
#1
talon tsi awd cant get to start
Got the pic up
I've got a 93 talon with the jdm4g63 evo turbo engine
When i turn the key i have nothing at all.
The lights work,head lights,brake lights,turn signals and enterior lights but
nothing else works.
I found three plugs to the harness near the batt that are not pluged, not sure where they go.
Anyone know anything pm me cause i know nothing about a talon.
Here are the pics of the plugs
I've got a 93 talon with the jdm4g63 evo turbo engine
When i turn the key i have nothing at all.
The lights work,head lights,brake lights,turn signals and enterior lights but
nothing else works.
I found three plugs to the harness near the batt that are not pluged, not sure where they go.
Anyone know anything pm me cause i know nothing about a talon.
Here are the pics of the plugs
Last edited by nasty cbr; 12-21-2007 at 09:07 PM.
#2
Your Local DSM Tech
Join Date: Nov 2002
Location: Newport News
Posts: 6,711
Likes: 0
Received 0 Likes
on
0 Posts
Re: talon tsi awd cant get to start
Your picture doesn't work. Make sure the starter is getting power. That would be my first guess.
3 Plugs need the battery could be:
- Speed sensor plug (simple 2 plug connector). I can't recall if all 1gs were mechanical or not.
- FIAV sensor plug on TB (I wanna say 4 or 6 prong connector that is usually black?)
- Cam angle sensor plug (rectangular, gray sometimes, 5 prong...maybe 6?)
- Coolant Temp Sensor plug, 2 pin connector, usually black.
Try uploading your photo again and it would be easier to help.
3 Plugs need the battery could be:
- Speed sensor plug (simple 2 plug connector). I can't recall if all 1gs were mechanical or not.
- FIAV sensor plug on TB (I wanna say 4 or 6 prong connector that is usually black?)
- Cam angle sensor plug (rectangular, gray sometimes, 5 prong...maybe 6?)
- Coolant Temp Sensor plug, 2 pin connector, usually black.
Try uploading your photo again and it would be easier to help.
#4
RIP Chris Schader
Re: talon tsi awd cant get to start
the plug thats shaped like a T is for the noise filter which is mounted on the bottom of the intake manfold on that bracket with the vacuum hoses on it. the big rectangle one goes to the throttle body idle speed control and the 2 prong one is for the knock sensor mounted on the back of the block. 1gs dont have a speed sensore luckily, ours is cable driven.
#6
RIP Chris Schader
Re: talon tsi awd cant get to start
that 2 prong plug actually looks like it goes to the alternator but i dont know why its all the way over there. its not the knock sensor i just remembered what it looks like. and the big plug could possibly go to the mas air sensor too.