cr1m3rat3z

I need pix of anybody's iacv/tps sensors so that i can figure out if the one i have on here is right. Only for s14 sr20det. I thought that the iacv was suppose to have an air outlet but mine doesn't have one. cant get the car to keep it's idle when i hit the gas - it just dies. helppppppp
oh and pix of how the vacuum lines that lead in/ out of the throttle body should go would also be appreciated

240dreams

Go to www.zeroyon.com and dl the S14 SR FSM. All of your questions should ne answered there. The IACV has an air outlet into the manifold where it's mounted. The inlet should be somewhere leading to the front of the motor. If it dies when giving it gas it's probably something else. IACV is mainly for idling with the throttle body closed.

cr1m3rat3z

already have that but the vacuum line diagram is different because the intake manifold inlets are in different places

240dreams

What parts are you trying to connect to the intake manifold? BOV, WG, FPR ?

cr1m3rat3z

yeah bov, waste gate etc
quick question if bov is fucked up will that cause the car to cut off? i was thinking that it couldn't

240dreams

If the BOV is open and leaking badly during idle, yes. You'd run rich.

cr1m3rat3z

hmmm.... gonna check that out now thanx

cr1m3rat3z

pix of throttle/intake lines
http://www.mytempdir.com/633587

really can't figure this out

240dreams

An S13 SR has similar outlets. Do you have your BOV connected to anyone of these? How about your wastegate? Try using those for either one. If there are any unused vacuum ports, plug them (they are probably from emissions control devices).