S14 rear strut bar?
#1
Registered Member
Thread Starter
Join Date: Nov 2002
Location: San Diego, CA
Posts: 6,278
Likes: 0
Received 0 Likes
on
0 Posts
S14 rear strut bar?
where does it go? I'm gonna order a JIC rear strut bar, but I wanted to konw where does it go? inside? I noticed the strut towers were inside the car, not in the trunk? can some one enlightedn me?
#2
I'm not into cars
Join Date: Nov 2002
Location: Newport News
Posts: 1,041
Likes: 0
Received 0 Likes
on
0 Posts
hopefully he doesn't mind me posting this... these are Eng's rear stb pics.
http://www.jlab.org/~beng/car/cusco_stb/back/
http://www.jlab.org/~beng/car/cusco_stb/back/
#3
Got a pic of the JIC rear bar? Never seen that one before.
Keep in mind that Cusco makes four different rear bars for the S14. I like the carbon one best.
I believe NISMO also makes one, but the rear bar is very hard to find.
My personal favorite and supposedly the best ever made is Carbing:
Keep in mind that Cusco makes four different rear bars for the S14. I like the carbon one best.
I believe NISMO also makes one, but the rear bar is very hard to find.
My personal favorite and supposedly the best ever made is Carbing:
#4
Registered Member
Thread Starter
Join Date: Nov 2002
Location: San Diego, CA
Posts: 6,278
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Skywalker
Got a pic of the JIC rear bar? Never seen that one before.
Keep in mind that Cusco makes four different rear bars for the S14. I like the carbon one best.
I believe NISMO also makes one, but the rear bar is very hard to find.
My personal favorite and supposedly the best ever made is Carbing:
Got a pic of the JIC rear bar? Never seen that one before.
Keep in mind that Cusco makes four different rear bars for the S14. I like the carbon one best.
I believe NISMO also makes one, but the rear bar is very hard to find.
My personal favorite and supposedly the best ever made is Carbing:
#5
Originally posted by Ultraprince
I only want to spen like 130-145 on these bars...damn...haha
I only want to spen like 130-145 on these bars...damn...haha
And yeah, a Carbing bar will cost you. But is well worth the money and the wait.
For the price and hassle of finding a NISMO rear bar, I'd much rather have a Carbing bar anyways. I was gonna get one before the show, but there's a 2-3 month wait on em for Z32's....so I'll just get it later.
#6
Registered Member
Thread Starter
Join Date: Nov 2002
Location: San Diego, CA
Posts: 6,278
Likes: 0
Received 0 Likes
on
0 Posts
I ended up getting a pilot bar, no rear bar yet. I'll get a JIC rear bar. I got it for free when I bought the Tein's he said it was for aprciation for buying some winding master TEINs.
#7
Administrator
Join Date: Nov 2002
Location: أنا لست إرهابيا
Posts: 10,636
Likes: 0
Received 0 Likes
on
0 Posts
I personally don't like the ones that go over the deck because either you have to dump the deck cover or cut holes in it. It does have more $bling factor since you can see it from outside the car.
Here's the JIC one:
http://www.speedalliance.com/misc/jic_rear_stb.jpg
Here's the JIC one:
http://www.speedalliance.com/misc/jic_rear_stb.jpg
__________________
Got a 1995-1996 240SX? Want a new front bumper?
Check this out. Posting on drag first to try and avoid shipping it.
Got a 1995-1996 240SX? Want a new front bumper?
Check this out. Posting on drag first to try and avoid shipping it.
Thread
Thread Starter
Forum
Replies
Last Post
RPRacing
Suspension / Brakes
62
05-12-2009 06:12 AM
DOHC-YA
Want to Buy / Trade ARCHIVE
5
09-20-2007 07:02 PM