p2r

Location: Central VA
Contact: PM - Post On Here - SnailPowered@Gmail.com - 434.989.8980 cell



Ok - So I'm looking into dropping an H22A swap into my boss's 92 Accord. It is an Automatic trans, and I can get the H22A AT swap pretty cheap (cheaper than rebuilding the stock engine that has 200K on it - with a cracked cylinder head).


I just want to know what tricks/special parts/etc I need to know about ...

I've dropped H22's before, but never into an Accord. So if you've done it before and know the in's/out's of this swap, please give me As Much Info As Possible!

Thanks VADRIVEN !!

I Love (.)(.)

http://www.jdmlove.org/do-it-yoursel...-90-93-accord/

Fabrik8

This is a very general topic and there is a LOT of info floating around on the internet (and Honda-Tech), stop bumping your thread and start doing some research... I'm not a big believer in repeating info here that can easily be found at hundreds (thousands?) of other places with a quick search.

If you have specific questions, ask them. Don't just ask "what do I do to swap this Honda engine into this Honda car"...

VroomVroom

its been attempted before, but nobody has succeeded

p2r

I know its been done.. I've read several threads on the topic, but if someone Knows Something that I should know (that isn't common knowledge) I'd like to know.

Thanks!

civicrider

it's basically all common knowledge

p2r

Thats the way it seems (as I have it all in front of me, now) I just wanted to be sure before the car was out of commission.

Thanks Again!