Problem w/ integra rear seat in a EG hatch
05-29-2007, 09:46 PM
#1
Registered Member
Thread Starter
Join Date: Mar 2003
Location: Cali/Newport News
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
Problem w/ integra rear seat in a EG hatch
Just wanted to know the best way to fit the bottom rear seat from a DC to EG hatch. Having problem with type r rear seat to lock the bottom part because it didnt match the holes.
05-30-2007, 08:49 AM
#2
braap braap
Join Date: Jul 2003
Location: Portsmouth
Posts: 14,535
Likes: 0
Received 0 Likes
on
0 Posts
Re: Problem w/ integra rear seat in a EG hatch
You have to get the four door bottom piece.
You'll have a 2inch gap on both sides with the 2 door piece. Aswel as the tab for the 10mm bolt will be on the other side.
You can drill a hole in your car and run a self tapping screw in it. I just left it sitting there and it sits fine.
You'll have a 2inch gap on both sides with the 2 door piece. Aswel as the tab for the 10mm bolt will be on the other side.
You can drill a hole in your car and run a self tapping screw in it. I just left it sitting there and it sits fine.
05-30-2007, 06:59 PM
#4
Registered Member
Thread Starter
Join Date: Mar 2003
Location: Cali/Newport News
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
Re: Problem w/ integra rear seat in a EG hatch
I'm just going to leave it like that then, I'll find a way to secure so it wont move from side to side when I turn, Thanks!
07-04-2007, 02:25 PM
#7
holla
Join Date: May 2005
Location: Va Beach
Posts: 8,179
Likes: 0
Received 0 Likes
on
0 Posts
07-05-2007, 03:36 AM
#9
Registered Member
Thread Starter
Join Date: Mar 2003
Location: Cali/Newport News
Posts: 323
Likes: 0
Received 0 Likes
on
0 Posts
Re: Problem w/ integra rear seat in a EG hatch
I used the middle seatbelt to hold the bottom cushion down, check out the pics.
http://www.flickr.com/photos/9589810@N03/717874871/
http://www.flickr.com/photos/9589810@N03/717874871/
Thread
Thread Starter
Forum
Replies
Last Post
jdmitr757
Interior / Electrical / Car Stereo
0
02-15-2009 08:29 AM