Stillpushin

I am replacing the blower motor in the crx. I got the dash off and everything. All the bolts are off for the actual motor. It will not come down due to the floorboard. We tried taking the fan housing off and it will not come completely off and we are not finding what is still holding it on. Please help. I am beginning to become irritated.

mysiqu

you didn't have to take apart the whole dash board, all you had to do is take the glove box out and work at it underneath, there should be a plastic like tube that runs into the bottom of the blower motor(take it off too) then take off the i thinkits 3 10mm bolts off then just pull it down or unless just meet me some where and i'll do it for you for some $ haahaa