oil return line?
#1
Unconfirmed User
Thread Starter
Join Date: Apr 2003
Location: Dubya-B
Posts: 988
Likes: 0
Received 0 Likes
on
0 Posts
oil return line?
i bought my turbo a few months ago and the bastard didnt send the oil return line off the turbo, does anyone have one or could possibly tell me what i should do in order to make one?
#2
Bitches get Stitches
Join Date: Mar 2003
Location: Chesapeake
Posts: 3,959
Likes: 0
Received 0 Likes
on
0 Posts
which turbo? if it's a toyota turbo you could probably go to toyota and get the part that goes into the return on the turbo itself, then order the stainless steel line and tap for your oil pan...it should only cost like 20-30 bux to order those last two things though...
#6
brake/steer/throttle
Join Date: Nov 2002
Location: sod off you bloody wanker
Posts: 1,542
Likes: 0
Received 0 Likes
on
0 Posts
no, it's the same. now, the return will be the tricky part. you need to return the the oilpan, but i would recommend using an oil cooler inline first. air-to-air is fine, but placing it will take some imagination. also, the MkI uses a banjo type fitting when returning to the oilpan. this is a better idea than using just a straight nipple. it's (the banjo) less prone to leaking oil. don't go too low on the oilpan, but don't go too high either as the oil pick-up will suck warm turbo return oil...
Thread
Thread Starter
Forum
Replies
Last Post