tby0090

i am trying to do a oil change, and the bolt won't come off. (i am going counterclockwise)
i've even tried to use a hammer to make it move, and it won't move.
i am really thinking about taking it to a shop for them to do it.
but what do you guys think? any suggestions so i don't have to spend $40 bucks on it?

please help.

SouthSideDetails

breaker bar?

WheelPowerRacin

If using a wrench, do you know how to "double wrench" (lock 2 wrenches together to make it longer)? If using a 3/8 ratchet and socket, do you have a small piece of pipe to slide over the end of the ratchet handle? Or a breaker bar or 1/2" ratchet as stated above? All these methods use the same principle, you need a longer lever to apply more force. Before spending $40 at a shop, go buy yourself a quality 1/2" breaker bar and matching 6 point socket to fit your drain plug. Unless its welded on it should come off. If the tools cost $40 at least you will have them in the future

Fabrik8

Wow, someone must have really overtightened that. Use a breaker bar and never ever tighten it anywhere close when you reinstall it. It's just a drain bolt; it only needs enough torque to seal properly and not loosen from vibration, and you should never need anything special to take it off..

ShawnD

blast it with piss

Fabrik8

Never heard of it. Can I buy that locally? Does it come with a red straw on the can?

ShawnD

does wd40 still come with a straw?

LeetPIE

Man up. /thread

sbdunkz757

when im using a wrench and i come across a bolt thats really tight, i just grab onto something in my car and push the wrench with my foot, always works for me.

madsteez

Not very safe if the car is elevated.