obd1 d swap in a 88 hatch..WIRING QUESTIONS?
12-13-2007, 04:35 PM
#1
Registered Member
Thread Starter
Join Date: Mar 2007
Posts: 334
Likes: 0
Received 0 Likes
on
0 Posts
obd1 d swap in a 88 hatch..WIRING QUESTIONS?
ok so i got a 88 hatch w/ a blown motor so i finally got another block & i will b swapping it soon.its an obd1 block. But i was wondering as far as the wiring of the motor goes, what will have to rewire? or what do i have to do?? the car has the stock wiring 0bd0 harness..
12-14-2007, 12:08 AM
#3
Team Livin Dreams
Join Date: Sep 2004
Location: nova
Posts: 777
Likes: 0
Received 0 Likes
on
0 Posts
Re: obd1 d swap in a 88 hatch..WIRING QUESTIONS?
Is your car a std dx or si? It really depends if your car is dpfi or mpfi also if your tring to convert to obd1 or stay obd0.
12-15-2007, 01:57 PM
#7
not a noob
Join Date: Dec 2002
Posts: 899
Likes: 0
Received 0 Likes
on
0 Posts
Re: obd1 d swap in a 88 hatch..WIRING QUESTIONS?
to keep it as simple as possible, use the stock/original intake manifold and dizzy.
just swap out the blocks or long blocks. use the stock/original intake manifold and dizzy that is in the car currently and put them onto the new block/long block with the stock harness that is in the car right now.
just swap out the blocks or long blocks. use the stock/original intake manifold and dizzy that is in the car currently and put them onto the new block/long block with the stock harness that is in the car right now.
Thread
Thread Starter
Forum
Replies
Last Post