obd0 b16 misfire
#1
AWD4G63
Thread Starter
Join Date: Oct 2005
Location: Charlottesville
Posts: 916
Likes: 0
Received 0 Likes
on
0 Posts
obd0 b16 misfire
OK so i have a b16 in my 90 crx hf.. I cant seem to find whats causing the misfire. Ive changed Fuel filter, Plugs, WIres, Cap,Rotor, Ecus, and Dizzy. I have msd on the car and have wired it up withought the msd box straight to the blaster coil. The coil is the only thing i have not changed . It misses with or withought the msd box, so i have ruled that out. Im gonna change the cap tomorow to retain the internal coil.to see if that works. LMK if u all have any info.
thanks
thanks
#5
AWD4G63
Thread Starter
Join Date: Oct 2005
Location: Charlottesville
Posts: 916
Likes: 0
Received 0 Likes
on
0 Posts
Re: obd0 b16 misfire
compression check checked good on every cylinder..175 across. I drove the car last night and it cut off and would not start back for avout 5 min. Ecu was flashing code 5 which is map sensor. Im gonna replace it tonight and hope for the best
#8
AWD4G63
Thread Starter
Join Date: Oct 2005
Location: Charlottesville
Posts: 916
Likes: 0
Received 0 Likes
on
0 Posts
Re: obd0 b16 misfire
I Changed the map sensor and did another compression check to make sure the guage was reading correctly and its still doin it. Im putting the coil in tonight to see if it makes a diffrence.
Thread
Thread Starter
Forum
Replies
Last Post
ef9zc
Parts ARCHIVE
66
11-05-2007 03:14 PM