Nissan SR20DET Q's
#1
ooooooooooowwweeeeee
Thread Starter
Join Date: Apr 2005
Location: Newport News VA
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
Nissan SR20DET Q's
Speedo rarely works,3rd brake light and rear wiper don't work can someone point me in the right direction?
S13 SR20DET black top
I need a TPS sensor
Does anyone know where I can get one
S13 SR20DET black top
I need a TPS sensor
Does anyone know where I can get one
Last edited by Don_is_Rad; 11-13-2008 at 12:05 PM.
#2
Registered Member
Join Date: Mar 2006
Location: lancaster
Posts: 490
Likes: 0
Received 0 Likes
on
0 Posts
Re: Nissan SR20DET Q's
you dont need to take the internal wastegate off to hook up a bov. just buy a metal hot pipe with a flange and t off the fpr.
as for the down pipe..... i'd run a ebay one but a flex pipe might help it last longer.
as for the down pipe..... i'd run a ebay one but a flex pipe might help it last longer.
#3
Registered Member
Join Date: Dec 2007
Location: Chesapeake and NOVA
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
Re: Nissan SR20DET Q's
The HKS SSQ is a blowoff valve and will not replace a waste gate. Two different parts that do different things. Downpipes are pretty generic, so I would think you should be ok with with one off EBay. Hope it fits properly.
#5
Registered Member
Join Date: Dec 2007
Location: Chesapeake and NOVA
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
Re: Nissan SR20DET Q's
There's already a stock recirculation valve, so you don't need a blowoff valve with a stock setup. You can replace it with an aftermarket blowoff valve if you want, just keep in mind if you vent to atmosphere, you might have problems stalling out.
#9
Friendly Jackboot
Join Date: Oct 2005
Location: NoVA
Posts: 4,281
Likes: 0
Received 0 Likes
on
0 Posts
Re: Nissan SR20DET Q's
i seriously doubt he or anyone running a non re circulated bov will stall out or even might as result.