Need Help from wrx owner
02-23-2003, 05:18 PM
#1
Drink Up, Chumps
Thread Starter
Join Date: Feb 2003
Location: Palm Beach Gardens
Posts: 20,155
Likes: 0
Received 0 Likes
on
0 Posts
Need Help from wrx owner(now with pics!!!)
I have a 2002 wrx and just installed perrin fuel rails. In the re-install process i came across a vacuum line that seems to not have a place. It is mounted directly to the wiring harness that is routed underneath the intake manifold. It looks like one end is supposed to connect to the (what looks like the idle air control) on the far back port on the intake manifold on the drivers side right under the inter cooler. The vacuum line is about four inches long, and I will try to attatch a picture within the next day or so. If anyone with a wrx could look for me or pm me with a little info. I would apperciate any help in order to clarify my stupidity. Thanks
Last edited by blah; 02-23-2003 at 10:14 PM.
02-26-2003, 01:08 PM
#4
Registered member
Join Date: Nov 2002
Location: Dropping 2 seconds off my name
Posts: 2,532
Likes: 0
Received 0 Likes
on
0 Posts
Nothing goes in that "hole" in the back of the intake manifold. I'm not sure which vacuum line your talking about. There is one that comes up from underneath to the BOV.
You can use my car for reference if you'd like. I'm in VB...just pm me (again)
But I know I'm not the only WRX owner here !!!!
Whats up fellas !?!?!? Help a brother out...
You can use my car for reference if you'd like. I'm in VB...just pm me (again)
But I know I'm not the only WRX owner here !!!!
Whats up fellas !?!?!? Help a brother out...
02-26-2003, 02:12 PM
#5
I'm not into cars
Join Date: Nov 2002
Location: Newport News
Posts: 1,041
Likes: 0
Received 0 Likes
on
0 Posts
It isn't connected to anything. If it's the one I'm thinking about at least... one end is connected to a black plastic thing, then it runs under the driver side intake manifold, turns 90 degrees down and just sits there.
02-27-2003, 05:17 AM
#6
Drink Up, Chumps
Thread Starter
Join Date: Feb 2003
Location: Palm Beach Gardens
Posts: 20,155
Likes: 0
Received 0 Likes
on
0 Posts
Well, rexer called it and I confirmed it on Twelvz car last night. This damn vacuum line does not connect to anything. Maybe that is why I dont remember removing it. Oh well, chock it up to stupidity. Thanks for all the help guys.
Thread
Thread Starter
Forum
Replies
Last Post
