TTEOmason108

so my moms so jdm she got me an ek4 clock for easter lol anyways i looked around and i cant really find anything on how to install this thing. its got four wires coming out of the back (white w/ blue stripe, yellow, black, and red w/ black stripe). ive been told to splice it into the radio harness but i really dont know which wires to put where and im not one to go and start cutting stuff if i dont know exactly what im doing. any help is appreciated and thanks.

the pigtail looks like this
http://i37.photobucket.com/albums/e5...DashClock3.jpg

and the clock looks like this when installed

Fabrik8

I'm going to take an educated guess that the wires are:

• Ignition switched power
• Constant power
• Ground
• Illumination/dimmer

I don't know which color is which. But yes, you should be able to tap off of your radio wiring if you need.

I'm not really a Civic interior mod expert, what is usually there instead of the clock?

EDIT: I just found via Google that the wiring should already be there for both the USDM and JDM clock, so you probably just have to find where the connector is tucked behind the dash.

Fabrik8

Here's your answer:

http://www.honda-tech.com/showthread.php?p=28218034

TTEOmason108

your a godsend

thats perfect
thank you so much

TTEOmason108

just put it in and everything works perfectly and was actually very simple

thanks again for your help

Fabrik8

No problem, glad to help. So just for closure, what did you end up needing to do? Did you have to wire it up or was there a plug already there behind the dash?

TTEOmason108

i didnt see a plug although i was only looking like behind the climate control. if there is a plug then it could be located under the steering wheel or something. i took off the bezel and since i didnt see one i just spliced the radio wires. took about 20 minutes.

burton

give me a call sometime mason i wanna see how coupe is coming along!

TTEOmason108

you cant see her for a couple more days. shes comin