need help tuning rb20 with aem f/ic!!!!!
05-23-2010, 03:24 PM
#1
Registered Member
Thread Starter
Join Date: Dec 2005
Location: Va Beach
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
need help tuning rb20 with aem f/ic!!!!!
does anyone on here know how to use the aem f/ic program? ive got the car running, and the laptop to recognize the f/ic, but all the maps read zeros across the board. its an rb20 with an rb25 ecu and fic-6.
Cody 7577714264
Cody 7577714264
Last edited by Chubbs; 12-13-2011 at 09:45 PM.
05-23-2010, 06:19 PM
#2
Racetracks
Join Date: Nov 2002
Location: How long is a piece of string?
Posts: 15,668
Likes: 0
Received 0 Likes
on
0 Posts
Re: need help tuning rb20 with aem f/ic!!!!!
Many piggybacks like that have default zero maps. A zero means that the piggyback passes through the stock pulse width without changing it. If you put a positive value, that will add to the stock pulse width, and if you put a negative value that will subtract from the stock pulse width. Power Commanders for motorcycles are the same way.
I'm not sure if there are basemaps for your engine, sorry. I don't usually mess with piggybacks. Someone else will probably know.
I'm not sure if there are basemaps for your engine, sorry. I don't usually mess with piggybacks. Someone else will probably know.
Thread
Thread Starter
Forum
Replies
Last Post