Mini Me swap Questions
#1
EF turd
Thread Starter
Join Date: Nov 2004
Location: newport news
Posts: 649
Likes: 0
Received 0 Likes
on
0 Posts
Mini Me swap Questions
The Car is an 89 DX Civic
I didnt plan on doing this swap i just got a d15b2 to get my car back up and running. The motor i bought was fucked up but about a month ago i bought a d16y8 but never used it. Can i put the vtec y8 head on my d15b2 bottom end without hooking up vtec? I plan on hooking it up later but i just need my car for work. Also can i use the dpfi on the y8 head? Same as the vtec i plan on going mpfi in about a month.. I heard i have to use the y8 timing belt and its good to use the y8 head gasket too? online it said ill need an adjustable camshaft gear because with the y8 belt it will be a half tooth off? I know i have to remove the oil jet from between cylinders 2 and 3.
Thanks
matt
I didnt plan on doing this swap i just got a d15b2 to get my car back up and running. The motor i bought was fucked up but about a month ago i bought a d16y8 but never used it. Can i put the vtec y8 head on my d15b2 bottom end without hooking up vtec? I plan on hooking it up later but i just need my car for work. Also can i use the dpfi on the y8 head? Same as the vtec i plan on going mpfi in about a month.. I heard i have to use the y8 timing belt and its good to use the y8 head gasket too? online it said ill need an adjustable camshaft gear because with the y8 belt it will be a half tooth off? I know i have to remove the oil jet from between cylinders 2 and 3.
Thanks
matt
#4
EF turd
Thread Starter
Join Date: Nov 2004
Location: newport news
Posts: 649
Likes: 0
Received 0 Likes
on
0 Posts
Re: Mini Me swap Questions
thanks for the info. not doing it for performance im just doing it to get my car back up and running so the dpfi will have todo for now.
#6
EF turd
Thread Starter
Join Date: Nov 2004
Location: newport news
Posts: 649
Likes: 0
Received 0 Likes
on
0 Posts
Re: Mini Me swap Questions
thanks. I put it all together yesterday the only problem i had was i tried to use an intake gasket off the d15b2 and it wasnt big enough on one side so i have to buy the y8 gasket then it will run.
#8
EF turd
Thread Starter
Join Date: Nov 2004
Location: newport news
Posts: 649
Likes: 0
Received 0 Likes
on
0 Posts
#9
Registered Member
Join Date: Apr 2007
Location: lancaster co.
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Re: Mini Me swap Questions
not exactly sure i think it is 1 to 2 teeth off i tried to use the d15 belt and it will fit on it but you will never get it i tdc it will always be off for some reason after i tried 3 or 4 times i went out got the y8 belt put it on and it was prefect the first time. so after that i would suggest going out and spend the forty $$$ and not waste the time on the d15 belt it won't work
#10
Registered Member
Join Date: May 2007
Location: Chesapeake
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Re: Mini Me swap Questions
Im having a dizzy problem with this swap. im getting mixed up with which of four kinds I need. I understand I need a VTEC so that narrows it down to two kinds.