milkshake on valve cap
12-25-2008, 07:50 AM
#1
Registered Member
Thread Starter
Join Date: Jun 2003
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
milkshake on valve cap
ok im getting milshake on top of my valve cover cap but not on the oil pan... I did a compression test and i have 210 compression on all 4 cylinder......i asked a mechanic what it could be he said could be a crack on the head or water port on the head....but before doing the ls vtec swap the head was checked for crack and all the other stuff and the compression seems perfect....so i thin that rules out head....could it be the headgasket...and i have a B18B block but i dont have a breather chamber in the back could that be it cause there in no way to seperate the vapor from the block....
12-25-2008, 07:58 AM
#2
Registered Member
Join Date: Apr 2006
Location: near charlottesville
Posts: 1,051
Likes: 0
Received 0 Likes
on
0 Posts
Re: milkshane on valve cap
Should be a black breather box sitting in the lower location. Top hose actually goes into breather box, then another hose with a pcv valve runs to the intake manifold. Is all the oil milky or just on the oil fill cap?
12-25-2008, 09:30 AM
#8
Registered Member
Thread Starter
Join Date: Jun 2003
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Re: milkshake on valve cap
the michnist told me to open the valve cover and check under just incase that its moisture from top of the valve cover cause when we started the car it was outside for a whole week and and there was watter on the spark plugs and the wires
12-25-2008, 10:05 AM
#9
braap braap
Join Date: Jul 2003
Location: Portsmouth
Posts: 14,535
Likes: 0
Received 0 Likes
on
0 Posts
Re: milkshake on valve cap
Get a picture of it.
It's pretty common for me to take a oil cap off of new cars and see a milky looking residue on the cap. It's normal for those cars.
Lets see if it's the same for you.
It's pretty common for me to take a oil cap off of new cars and see a milky looking residue on the cap. It's normal for those cars.
Lets see if it's the same for you.
12-27-2008, 06:28 AM
#10
Registered Member
Thread Starter
Join Date: Jun 2003
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Re: milkshake on valve cap
hmm well i went home to start up my car yesterday and i let it run for abut 10 min then turned it offf then i saw white stuff on the oil cap but now its only like a small piece.... like a dime size in the middle and this time it was very gooooey...it looked like a girls cum...lol i know bad comparison but thats what i looked like...after that i turned the car back on agian after i wiped the thing off...then i let it run again for atleast a good 10 min and the stufff never came back there was just oil on the oil cap....i got a third opinion from the machinist that built my motor and he said that it could be cause of im proper ventilation on the car...because i guess that 94 ls motors didnt come with a breather box or something and the ventilation is too small.... so this is my plan 
i just need to find some one to do it for meeeeee thanks guys ill see if it gets anyworse or better hopefully beter
i just need to find some one to do it for meeeeee thanks guys ill see if it gets anyworse or better hopefully beter
