ls/vtec swap into dx coupe
#1
Registered Member
Thread Starter
Join Date: Jan 2004
Location: Annandale
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
ls/vtec swap into dx coupe
i have a ls/vtec swap almost ready to be dropped in my 93 dx coupe and i need some questions answered....if anybody has done this swap or has some experience with it pm me plz. thanx
#5
Registered Member
Thread Starter
Join Date: Jan 2004
Location: Annandale
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
Re: ls/vtec swap into dx coupe
ok....first, i need to know if ls axels can fit with a gsr tranny?? second, can i tap my stock harness with the neccassary wires and have it run right??? also where can i get the wires from???
#6
takin it all
Join Date: Jan 2003
Location: 757/PA/MD/Boston,MA
Posts: 6,934
Likes: 0
Received 0 Likes
on
0 Posts
Re: ls/vtec swap into dx coupe
yes and yes, the axels will fit, and second you can have your non vtec wiring harness still in the car and also have vtec wired up properly. anything else young one?
#7
Registered Member
Thread Starter
Join Date: Jan 2004
Location: Annandale
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
Re: ls/vtec swap into dx coupe
now, will stock mounts work or do i have to go hasport? Also i havent seen too many dynos on stock ls/vtecs and i was just wondering where do they make peak hp and tq, because if i need to rev past 8k im gonna go ahead and upgrade the springs and rets.. i forgot to mention im boosting in the future.
#9
Registered Member
Thread Starter
Join Date: Jan 2004
Location: Annandale
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
Re: ls/vtec swap into dx coupe
also can somebody help me apply this flow chart to my setup??? basically a garrett super t70. im tryin to figure out if this big a turbo will be in my efficiency range.
Last edited by 93civic; 02-16-2004 at 09:40 AM.