ls vtec headgasket ?
#3
#5
Fugit motorsports
Join Date: Aug 2004
Location: Nun ya
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Re: ls vtec headgasket ?
If you don't have a real answer then please don't post.he didn't ask for a smart ass so please if you don't k ow then move on
Thank you.
Try looking on toda I think they might have some close the that
Thank you.
Try looking on toda I think they might have some close the that
#6
baller/dickbutt#69
Join Date: Nov 2002
Location: hampton
Posts: 16,059
Likes: 0
Received 0 Likes
on
0 Posts
Re: ls vtec headgasket ?
NO ONE GIVES A FUCK ABOUT YOU OR ANYTHING YOU HAVE TO SAY...
A CIVIC WIDEBODY...PLEASE POST A PIC OF THIS FINE JEWEL...
#7
Re: ls vtec headgasket ?
First things first;
0.085mm? Thats about 0.003" of an inch, or almost 1/4th the thickness of a piece of notebook paper. I'll assume you're retarded and meant 0.85mm which equates to about 0.033" of an inch. I'd bet your 'boy' could get a .030" head gasket no problem. In fact, through the mysterious powers of google, within 2 searches, I found a .030" headgasket; In fact, here you go; http://lmgtfy.com/?q=honda+head+gasket+ls%2Fvt Its the very first link.
Your friend is dumb for calculating this AFTER the purchase of other parts/during the build
Second ,
If he's shooting for at least 12.16:1 CR, then a thinner head gasket will just give him a higher number. If he wants that CR at highest, then simply get a thicker headgasket.
0.085mm? Thats about 0.003" of an inch, or almost 1/4th the thickness of a piece of notebook paper. I'll assume you're retarded and meant 0.85mm which equates to about 0.033" of an inch. I'd bet your 'boy' could get a .030" head gasket no problem. In fact, through the mysterious powers of google, within 2 searches, I found a .030" headgasket; In fact, here you go; http://lmgtfy.com/?q=honda+head+gasket+ls%2Fvt Its the very first link.
Your friend is dumb for calculating this AFTER the purchase of other parts/during the build
Second ,
.085mm head gasket to have atleast a 12:16 to 1
Thread
Thread Starter
Forum
Replies
Last Post
Lars
Want to Buy / Trade ARCHIVE
4
12-08-2008 05:33 PM