LS/VTEC crank seal replacement tips!!!
#1
Registered member
Thread Starter
Join Date: Jul 2008
Posts: 569
Likes: 0
Received 0 Likes
on
0 Posts
LS/VTEC crank seal replacement tips!!!
Hey I finally found out that the crank seal on my car has been the culprit to the oil leaks in my garage..
I am def going to replace it this weekend... I was just wondering if anyone had some tips or any problems while changing it..
Thanks for any help in advance..
I am def going to replace it this weekend... I was just wondering if anyone had some tips or any problems while changing it..
Thanks for any help in advance..
#2
Dont guess, diagnose
Join Date: Mar 2005
Location: On the beach.
Posts: 1,470
Likes: 0
Received 0 Likes
on
0 Posts
Re: LS/VTEC crank seal replacement tips!!!
Easy as pie, no real secrets. You will have to remove the timing so you can take the crank gear off to access the front seal. So use some small screwdrivers to put through the cam lock holes in the plates/ When the motor is TDC on #1 there are small holes in the camshafts that line up with the holes in the cam cap plates. Place your small screwdrivers or allen keys int hem to hold everything in time. Makes it super easy.
Thread
Thread Starter
Forum
Replies
Last Post