Lowered '08 Civic SI Alignment????
#1
Registered Member
Thread Starter
Join Date: Sep 2008
Location: Richmond, VA
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Lowered '08 Civic SI Alignment????
Hello,
I have a ‘08 Civic SI Sedan. I recently replaced my 1.4" Eibach sports-line springs with BC Racing BR Coilovers. (With Same 1.4” drop) I replaced my front OEM Camber bolts and OEM rear Camber Arms with SPC Performance (Strongly recommended from other 06-08 civic owners)
I am now in need of an alignment and wanted to check specs from someone knowledgeable with a DD car with an owner who loves to corner turns and drive twisting, curvy roads. Handling performance is a must! I have heard keep toe for both as OEM 0, Front and Rear Camber: Start off by -.5 to -.75 all way round until I get a good handle on how the car is reacting to the new changes and work up from there. Thoughts and opinions welcomed!!
Scott
http://www.spcperformance.com/PROD_D...ROD_SEARCH.cfm
I have a ‘08 Civic SI Sedan. I recently replaced my 1.4" Eibach sports-line springs with BC Racing BR Coilovers. (With Same 1.4” drop) I replaced my front OEM Camber bolts and OEM rear Camber Arms with SPC Performance (Strongly recommended from other 06-08 civic owners)
I am now in need of an alignment and wanted to check specs from someone knowledgeable with a DD car with an owner who loves to corner turns and drive twisting, curvy roads. Handling performance is a must! I have heard keep toe for both as OEM 0, Front and Rear Camber: Start off by -.5 to -.75 all way round until I get a good handle on how the car is reacting to the new changes and work up from there. Thoughts and opinions welcomed!!
Scott
http://www.spcperformance.com/PROD_D...ROD_SEARCH.cfm
Thread
Thread Starter
Forum
Replies
Last Post