itr front end
#1
Registered Member
Thread Starter
Join Date: Jul 2006
Posts: 712
Likes: 0
Received 0 Likes
on
0 Posts
itr front end
i know this tech talk but i have been wanting to do a itr front end conver on my teg and i just had a few questions,
1 how much would i be looking for spend for a decent front end" no ebay knock off"
2 is doing the front end conversion hard at all or is it all just bolt on?
1 how much would i be looking for spend for a decent front end" no ebay knock off"
2 is doing the front end conversion hard at all or is it all just bolt on?
#2
Re: itr front end
check out passwordjdm.com for front ends that will give you a ruff idea how much those things run.
(i think!) for doing the conversion, the hardest part is changing the whole radiator core support. you have to drill out all the spot welds, remove the orginal core support and replace it with the JDM core support, spot weld that back into place. everything else is bolt on.
(i think!) for doing the conversion, the hardest part is changing the whole radiator core support. you have to drill out all the spot welds, remove the orginal core support and replace it with the JDM core support, spot weld that back into place. everything else is bolt on.
#3
Re: itr front end
Yeah what jay said but don't go thru password yer gonna get raped esp. on shipping for your front private sellers are giving them up for around 1000 for the non hid ones and 12-1500 for hid ones. My buddy did my frontend for me when your ready he can do yours for 250.
ant
ant
Thread
Thread Starter
Forum
Replies
Last Post
phantasticphan
Parts ARCHIVE
7
10-13-2008 07:30 PM
jdmitr757
Import - ASIA
56
09-08-2008 02:51 PM