Iddle air control valve
#1
Registered Member
Thread Starter
Join Date: Jan 2008
Location: Near Charlottesville
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
Iddle air control valve
anybody know how to fix it?
already checked for vacuum leaks, tps voltage, map sensor, 4 differemt iacv's 2 used ones and 2 brand new ones. its wired up straight to the ecu
and still no go. im f****** tired of messing with it.
thanks in advance.
already checked for vacuum leaks, tps voltage, map sensor, 4 differemt iacv's 2 used ones and 2 brand new ones. its wired up straight to the ecu
and still no go. im f****** tired of messing with it.
thanks in advance.
#7
Racetracks
Join Date: Nov 2002
Location: How long is a piece of string?
Posts: 15,668
Likes: 0
Received 0 Likes
on
0 Posts
Re: Iddle air control valve
It's wired straight to the ECU, but have you actually checked the wiring? It's possible that you have a broken wire, corrosion inside the wire insulation, or corrosion on the connector terminals. You can swap in parts all you want, but unless you've checked the other things then you're just chasing your tail.
#9
Ohhh Snap
Join Date: Oct 2007
Location: Virginia beach
Posts: 4,535
Likes: 0
Received 0 Likes
on
0 Posts
Re: Iddle air control valve
Wow calm down on the bumps but like fabrik said,check the actual pig tail connector that goes into the ecu,my vtec wiring did the same on my car till i swapped out the pins on the plug.