rollinondubz

i have a 97 ek with an ls/vtec.. gsr headand tranny and b18b block w/ p72 ecu (not that it matters) thats throwing a P1337 manufacture cntrlled ignition misfire... i checked the resistance between the 2 pins on the ckf sensor.. it has 1.8 ohms. there is no continuity. so i know the sensor is working.. now i replaced a cam seal not too long ago and i had problems tightening the timing belt.. if the gears are off a tooth or two.. would that trigger the engine light?? everytime i reset the light it comes right back on when i start the engine.. ANY help is highly appreciated


oh and check my threads.. ha

derek