Honda Suspension
04-06-2006, 02:01 PM
#1
LP LP --> LK HP
Thread Starter
Join Date: Aug 2003
Location: Las Vegas
Posts: 1,639
Likes: 0
Received 0 Likes
on
0 Posts
Honda Suspension
Does anyone know what size bolt threads through the engine bay of the EG or DC for the OEM ITR Strut Bar/ Mugen Strut Bar??? Its the two holes on both sides of the strut tower... Thanks
Last edited by BOOST FR3AK; 04-10-2006 at 08:31 AM.
04-06-2006, 04:59 PM
#3
Banned
Join Date: Oct 2005
Location: Virginia Beach, Virginia fucka
Posts: 3,258
Likes: 0
Received 0 Likes
on
0 Posts
Re: Honda Suspension
Shit, I used to know it. I think its (12.5-something.) Call up bapgeon ask them to look in a "dorman" book for the bolt, they will be able to give you the Knurl, diameter, size all that jazz.
04-06-2006, 05:07 PM
#4
LP LP --> LK HP
Thread Starter
Join Date: Aug 2003
Location: Las Vegas
Posts: 1,639
Likes: 0
Received 0 Likes
on
0 Posts
Re: Honda Suspension
Originally Posted by DOHC crx VTEC
Shit, I used to know it. I think its (12.5-something.) Call up bapgeon ask them to look in a "dorman" book for the bolt, they will be able to give you the Knurl, diameter, size all that jazz.
04-06-2006, 05:29 PM
#5
Banned
Join Date: Oct 2005
Location: Virginia Beach, Virginia fucka
Posts: 3,258
Likes: 0
Received 0 Likes
on
0 Posts
Re: Honda Suspension
Originally Posted by MUGEN FR3AK
Thanks
also try carquest. They are good people. If only I could remember there number
04-07-2006, 03:42 AM
#7
Bitches get Stitches
Join Date: Mar 2003
Location: Chesapeake
Posts: 3,959
Likes: 0
Received 0 Likes
on
0 Posts
Re: Honda Suspension
yank the nut off of it, go to the hardware store and start checking to see what thread bolt the nut fits. i think hondas are always a 1.5 pitch with varying degrees of size.
04-07-2006, 12:44 PM
#8
LP LP --> LK HP
Thread Starter
Join Date: Aug 2003
Location: Las Vegas
Posts: 1,639
Likes: 0
Received 0 Likes
on
0 Posts
Re: Honda Suspension
Originally Posted by sk8rmike
yank the nut off of it, go to the hardware store and start checking to see what thread bolt the nut fits. i think hondas are always a 1.5 pitch with varying degrees of size.
04-07-2006, 03:17 PM
#9
Registered Member
Join Date: Feb 2006
Location: Charlottesville
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Re: Honda Suspension
Originally Posted by MUGEN FR3AK
There is no nut... Its just a hole in the engine bay where a stud usually is...
The nuts that go on them are listed as 10 x 1.25mm according to the Helms manual.
04-07-2006, 03:46 PM
#10
LP LP --> LK HP
Thread Starter
Join Date: Aug 2003
Location: Las Vegas
Posts: 1,639
Likes: 0
Received 0 Likes
on
0 Posts
Re: Honda Suspension
Originally Posted by 95siguy
What are you trying to do? The "bolt" that usually comes through there is attached to the damper mounting base, part of the spring/shock assembly.
The nuts that go on them are listed as 10 x 1.25mm according to the Helms manual.
The nuts that go on them are listed as 10 x 1.25mm according to the Helms manual.