Fl1pSde 101

Well I just got my car bacK.I drove it home and it was working fine.till 3 days later for some reaason the bov wouldnt open at all....checked the vacuum source and teed it off to my brake booster and still not opening.Im guessing the bov is done? could be the spring inside corroded and stifened up,cause its a little tight and I have to push with a little more effort just to see how hard it is to push...any suggestions.BTW is a hks ssq bov

Daft Punk

the diaphragm could be done.

Fl1pSde 101

damn.....so ifs hard to push then its done? shits sux.....ig uess time for a new one

thermal

bring it by... let me take a look at it this weekend...

Fl1pSde 101

does sunday sound good to come by? cause i work from 10-5 saturday then off sunday..whichever works with me

Silverbullet86

the piston shaft is probably broken or the big seal is leaking.

Fl1pSde 101

would that be the reason why its stiff

brandon.beene

maybe its too tight, did you try taking the inner spring out?. Mine was real tight and i couldnt get it right, So i took it apart and took the inner spring out and wala it works like a charm..

Fl1pSde 101

u mean take it apart? would taking off the spring make it not function right?just curiousity

Fl1pSde 101

replaced the hks bov with another one andfor some reason it still doesnt open up....i switched around and tried other vacuum source still doesnt work......even if idle it doesnt even open up...ive been trying to figure out what could be causing it but still no luck