Hey guys starten new project soon need advice... b16 in crx.
#1
Registered member
Thread Starter
Join Date: Jan 2004
Location: Winchester
Posts: 3,972
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys starten new project soon need advice... b16 in crx.
Hey guys as you know i drive a twin turbo 300zx but im buying a 1989 HF crx from my buddy for 700 bucks and the questions im having is i know i wanna put a b16 motor in there because i want v tec but ... how hard is the swap? i know i can get the motor and trans for less then 1300 and a wire harness for less then 150 but how hard is it to install the motor and wire it up for v tec? Ive never delt or even worked on a honda before only DSM's and Nissan's and this is gonna be very new to me so im wondering how hard is this? and what all is needed to swap a SI motor "b16" in a CRX?
thanks
Jason
p.s in my "signature" im tryin to have my picture come up.. how do i do that?
thanks
Jason
p.s in my "signature" im tryin to have my picture come up.. how do i do that?
Last edited by Jason300zxTT; 01-23-2004 at 06:49 PM.
#2
Awesome.
Join Date: Nov 2002
Location: Virginia Beach
Posts: 13,483
Likes: 0
Received 0 Likes
on
0 Posts
You can pretty much buy every part needed for the swap. www.honda-tech.com has a lot of info in their archives, and www.hasport.com has some articles on it, too. www.honda-swap.com is also another site to check it. It's surprisingly easy aside from the rusted bolts and nuts you are bound to encounter.
Thread
Thread Starter
Forum
Replies
Last Post