iWANTmugen

i want to lower my car but i fear that the tires on my 14's are too big/thick. tire specs are p195/70r14. is there any tire that is smaller than this one that would fit 14's? like low profile tires

TITS

i have 185/60'r14 on my da gsr's (14's)

vxc760

how low you tryna go ? do you wanna be able to take turns good ?

iWANTmugen

i was thinking about getting some coilovers and lower 2-3 inches. any ideas? and efnstuffup is your da lowered? and how much? do you get camberwear?

iWANTmugen

i never understood tire size's anyways. can anyone explain what the numbers mean? lol

PJ2

Let's give this a try, the first number indicates the tire's section width in millimeters (note that this is not the thread width but the width of the tire at the sidewall) 195mm in your case, the second number indicates the height of the tire also in mm as a percentage of that first number 195/70, so your tire is 70% as tall as it is wide or 136.5mm tall and the third number indicates the wheel size. To calculate into inches divide those numbers by 25.4. Hope that helps.

TITS

i have a ef , but its lowered not dumped yet though and not much camber wear and after you dump yours just get a camber kit .

iWANTmugen

oh i see. and ok sounds good, so i should go with the 185/60 lower and then get a camber kit? could you go any smaller than 185/60?

iWANTmugen

can someone bump my wtb: rota slip thread please?

TITS

i mean im going 205's but it all depends of preference im honestly not happy with the 185's cause they dont hold up on boost ive had 205's before on my special editions and the did pretty well . but if you stick with 195's and dump just get camber kit . you'll be set