crazyb

i wanna know if i have a b16a obd0 block will a hydro transmission bolt right up and how much changing is it to put the obd0 block in since it is a obd1 car also if you had a a3 block and a3 head would it be any different to hook up to your car?

Bert

the tranny will bolt up. all bseries trannies bolt up to all bseries motors...Just make sure you get the correct clutch to bolt it up. early b series trannies (90-91) use a small spline tranny. You would need a 92+ clutch disc. All bseries pressure plates will bolt up to any bseries flywheel so that doesn't matter. you also need to change driver side bracket on the motor. If you have a b16a2/a3 block, remove the black bracket on the timing belt side of the motor and switch it to the a1 block. HTH