ridindurty813

I have a 94 civic si hatch that wont go into gear when car is running. Recently changed the clutch master and slave about a month ago. Been driving the car for the past month and even today. Then today i get home and try to go back out and the car doesnt get into gear. Can start it up fine. Turn it off and press the clutch in and go thru every gear. Fine. Press clutch in to start. and works fine, but press clutch in to go to first and nothing. Feels like something blockin the gear. IDK. Let me know what you think. Need to fix ASAP.

Was thinkin that the clutch pedal switch went bad. Can it go bad? Anyone heard of that. Shit, IDK.

Thanks for the help!!!!!

NasTHatch

flywheel botls could have backed out, happened to me once....

planb

i had that same problem, i took it in and they said i had a cracked shift plate, so i replaced the clutch. might be same problem?

ridindurty813

Where's a good place to get it checked out at? How much would it cost?

nftuatn

https://www.vadriven.com/forums/sponsor-marketplace-42/affordable-automotive-repair-nftuatn-316525/

mike703

before you go ripping apart the car try bleeding the clutch and checking the fluid.

92civic

i am 10000000000000% sure you need to replace the clutch same thing happened to me, its not the fluid or nothing of that sort trust me and also you might as well change the flywheel to

BAN HAMMER

You give horrible advice. fucking stop already.

L_U_C_K

Can't find it, grind it..

ridindurty813

Said it was the tranny!