have 89 civic, swaped motor, which computer??
a friend has a 89 4 door civic that had a d15 PGMI in it, and he just swapped a d16 vtec
which computer do i need to run |
Re: have 89 civic, swaped motor, which computer??
Originally Posted by GotB00stPsi
a friend has a 89 4 door civic that had a d15 PGMI in it, and he just swapped a d16 vtec
which computer do i need to run Other than that you can convert to OBD1 and run a P28 ECU if you want. |
Re: have 89 civic, swaped motor, which computer??
either a p28 or a p08... if its a p08 then you only need a 1 wire 02 sensor...if you run a p28 you need a 4 wire o2
|
Re: have 89 civic, swaped motor, which computer??
yea it also depends if its obd0 or 1 ?
|
Re: have 89 civic, swaped motor, which computer??
just run a pm6 with rmp activated switch. did you rewire under the hood to mpfi
|
Re: have 89 civic, swaped motor, which computer??
Originally Posted by 91 Hatch
just run a pm6 with rmp activated switch. did you rewire under the hood to mpfi
yeah your gonan need to do that too!, i have a manual pm5 out of a 88-91 civic dx , if you need that you can holler at me and you can get it for cheap.. but MPFI is a must first your gonan need a crx si or a d16z6 (92-95 civic ex/si) head and intake manifold with all sensors, and obd1 injectors...there is 109241498194 posts on this on honda-tech.com if you get the z6 head your gonna have to vire vtec too... boomslang makes conversion harness's for what you are doing! or fabrik8 off here |
Re: have 89 civic, swaped motor, which computer??
Originally Posted by Fabrik8
I have the perfect solution for you but I'm moving out of state. I can convert PM6s to have Z6 maps and vtec output. And launch control. Read here. I'll be back up and running in a few weeks hopefully.
Other than that you can convert to OBD1 and run a P28 ECU if you want. |
All times are GMT -8. The time now is 05:02 AM. |
© 2024 MH Sub I, LLC dba Internet Brands