harrness help
05-28-2007, 08:03 AM
#1
Registered Member
Thread Starter
Join Date: May 2007
Location: newport news
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
harrness help
I have a 88 civic DX 4 speed. I put a B16A2 in it and it came with the motor harrness but it does not connect with my car harrness. Waht harrness can I use to hookthem together?
05-28-2007, 08:56 AM
#2
VTEC
Join Date: Nov 2004
Location: Newport news 757
Posts: 1,543
Likes: 0
Received 0 Likes
on
0 Posts
Re: harrness help
the b16 harness will not work you have to use ur stock harness but you have to modify it to work ...like convert to multi point wire the knock sensor, vtec, and the 2nd o2 idk if you have change the distributer plugs
05-28-2007, 12:12 PM
#3
Registered Member
Thread Starter
Join Date: May 2007
Location: newport news
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Re: harrness help
Is there a wiring diagram that I can get to go by because I can do pretty good at the motor stuff but the wiring I'm going to need something to go by.
05-28-2007, 01:32 PM
#4
VTEC
Join Date: Nov 2004
Location: Newport news 757
Posts: 1,543
Likes: 0
Received 0 Likes
on
0 Posts
Re: harrness help
http://www.crxresource.org/modules.p...rticle&sid=134
step 47
http://effinmotorworks.com/Effin_MPFI_swap.htm
its the mpfi swap info
step 47
http://effinmotorworks.com/Effin_MPFI_swap.htm
its the mpfi swap info
Thread
Thread Starter
Forum
Replies
Last Post