H22 Swap...what do i need??
11-26-2009, 08:00 AM
#3
Registered member
Join Date: Jun 2007
Posts: 728
Likes: 0
Received 0 Likes
on
0 Posts
Re: H22 Swap...what do i need??
Well if the motor has a spun bearing you should take it apart to make sure that the crank is not hurt. If it is then you can rebuild it or just buy another swap.
Parts to put it in: the swap is almost a drop in swap other than you need to get a prelude upper drivers side mount (not sure on the year) and then you will have to modify a few things. Wires will need to be made longer because of the wider motor and then the P\S will be an issue as well. I am not sure how to make that part work other than getting the accord P\S line remade using the H22 upper half (the part that bolts to the pump).
I might be off on the mount, but I know that I used a prelude one back in the day. There might be better options now.
Parts to put it in: the swap is almost a drop in swap other than you need to get a prelude upper drivers side mount (not sure on the year) and then you will have to modify a few things. Wires will need to be made longer because of the wider motor and then the P\S will be an issue as well. I am not sure how to make that part work other than getting the accord P\S line remade using the H22 upper half (the part that bolts to the pump).
I might be off on the mount, but I know that I used a prelude one back in the day. There might be better options now.
03-25-2010, 06:37 AM
#5
!! Buy My Parts !!
Join Date: Apr 2006
Location: Charlottesville, VA
Posts: 2,764
Likes: 0
Received 0 Likes
on
0 Posts
Re: H22 Swap...what do i need??
03-25-2010, 09:25 AM
#6
CAPS LOCK BABY
Join Date: Apr 2008
Posts: 5,482
Likes: 0
Received 0 Likes
on
0 Posts
Re: H22 Swap...what do i need??
So heres my situation, im getting ready to trade my car(domestic) for a 94 accord lx. Its got an F22 VTEC motor in it...Im also going to be dumpin around 3500 into it but I want to do everything right...The car is a good base car. Its lowered or on TenzoR suspension, fresh paint, JDM headlights and grill, and some gay 18" chrome wheels, and im goin full JDM...I have a buddy that has a spare H22 setting around with about 65K on it. I has a spun barring, and thats it...What all would I have to do to swap that H22 into the accord and how much am I looking at spending for the swap and the barring?? Any info will help out thanks...
Post here or PM
Post here or PM
FGT.
03-25-2010, 04:14 PM
#8
Registered Member
Thread Starter
Join Date: Sep 2009
Location: Lexington, VA
Posts: 1,217
Likes: 0
Received 0 Likes
on
0 Posts
Re: H22 Swap...what do i need??
Ok....I dont give a fuck about a peice of shit honda or any of you pussies on here that just like to bash people shit...I was only asking for a freind who needed a little advice....he no longer needs help as the swap is done and if he did, obviously the pricks that have posted in this thread cudnt help in change the fuckin spark plugs!!!!
Thread
Thread Starter
Forum
Replies
Last Post
Ej8Kid
Engine / Exhaust / Drivetrain
7
05-31-2009 09:23 AM