boostedgst97

ok so i bought osme gsr seats and i was gonna sell them but im thinking of puttin them in my car what do i have to do to get them to fit. when i test fitted them only one hole lined up.
do i have to change brackets or what i though all honda seats would bolt up 3 of 4 holes most time is the ex/si seats wider than most rails

Don_is_Rad

swap the seat brackets and your good! I did it with 2000 prelude seats in my hatch.

boostedgst97

ok so how do you switch the brackets i looked mine has like welds plus one bolt on each side of the brackets

Don_is_Rad

You actually have to unbolt it from the seat itself. Start by removing plastics then the hooks or plastic clip on the lower part of the back rest so you can fold back the cloth then you should be able to push the cushion out of the way to get to the bolts holding everything together. Or you can stop by my house and I can show you 358-4350, I'm in Newport News also!