GREDDY FULL AUTO TURBO TIMER INSTALL ON DC2
#1
GSR-T. NeedaWebsite?
Thread Starter
Join Date: Oct 2005
Location: Portsmouth
Posts: 513
Likes: 0
Received 0 Likes
on
0 Posts
GREDDY FULL AUTO TURBO TIMER INSTALL ON DC2
IF anyone can help me install this please let me know because the one i have the instructions are in japense
#2
TurboPipingSystems
Join Date: Jul 2003
Location: USDM Land, Va Bch
Posts: 1,483
Likes: 0
Received 0 Likes
on
0 Posts
Re: GREDDY FULL AUTO TURBO TIMER INSTALL ON DC2
No need to use the hand brake and speedo tap. Just use the "count down" function. Here:
http://importnut.net/turbotimer.htm
If you still cant do it, PM me for a cheap install..........
http://importnut.net/turbotimer.htm
If you still cant do it, PM me for a cheap install..........
#3
GSR-T. NeedaWebsite?
Thread Starter
Join Date: Oct 2005
Location: Portsmouth
Posts: 513
Likes: 0
Received 0 Likes
on
0 Posts
Re: GREDDY FULL AUTO TURBO TIMER INSTALL ON DC2
very vouge picture i still dont know what the wires are coming off the timer itself lol
i know that one purple is speedo and the other is the ebrake thing so are the other the same as the ones on ignition
i know that one purple is speedo and the other is the ebrake thing so are the other the same as the ones on ignition
#5
TurboPipingSystems
Join Date: Jul 2003
Location: USDM Land, Va Bch
Posts: 1,483
Likes: 0
Received 0 Likes
on
0 Posts
Re: GREDDY FULL AUTO TURBO TIMER INSTALL ON DC2
Red on timer= White on ignition
Green on timer= Blk/Yel on ignition
Blue on timer= is the only one that is not clear on the pic. But if you take apart your igntion cover, it should be super easy to figure out. I just dont want to take mine apart just to verify the color..... otherwise, as mentioned above, look for the conversion harness....
#6
Re: GREDDY FULL AUTO TURBO TIMER INSTALL ON DC2
Just buy the harness connector from a store. It makes it so easy. It is just plug and play at that point. Unless you have already cut the harness off the turbo timer. Then you would need to either hard wire that or wire the harness back on. It comes out being like $20 shipped.
Thread
Thread Starter
Forum
Replies
Last Post